Products 
| Quantity: | |
|---|---|
These pipette tips are manufactured from medical-grade virgin polypropylene (PP) resin. The material demonstrates resistance to common laboratory reagents including alcohols, dimethyl sulfoxide (DMSO), dilute acids, and dilute bases. The polypropylene material maintains structural integrity across temperatures ranging from -80°C to 121°C, supporting both freezer storage and autoclave sterilization procedures.
Select models receive a surface treatment designed to reduce non-specific adsorption of proteins, nucleic acids, and other biomolecules. This treatment targets sample retention on internal walls, which supports recovery of dilute or precious sample materials. Low-binding tips are indicated for polymerase chain reaction (PCR), quantitative PCR (qPCR), and nucleic acid extraction workflows.
Each production batch undergoes volume calibration testing following ISO 8655 guidelines. Tolerance values vary by nominal volume:
Nominal Volume | Systematic Error (±) | Random Error (CV, ≤) |
|---|---|---|
10 μL | 0.1 μL | 0.05 μL |
100 μL | 0.8 μL | 0.2 μL |
200 μL | 1.0 μL | 0.3 μL |
1000 μL | 2.0 μL | 0.5 μL |
5000 μL | 10.0 μL | 2.0 μL |
Internal wall smoothness is controlled during the injection molding process. Gravimetric residue tests show average liquid retention below 1% of nominal volume for aqueous solutions. This figure is measured under standard laboratory conditions (23°C, 50% relative humidity) using deionized water.
The cone interface follows industry-standard dimensions, providing compatibility with most manual and electronic single-channel and multichannel pipettes from major manufacturers. Tip attachment requires consistent pressure to form an airtight seal.
The flexible upper collar accommodates minor dimensional variations across pipette brands. Seal integrity is maintained across the full aspiration and dispensing pressure range of standard air-displacement pipettes. Users should perform a fit check with their specific pipette model before large-volume procurement.
Sterile versions are treated with gamma irradiation at a target dose of 25-40 kGy. The sterilization process is validated per ISO 11137 requirements. Sterile tips carry a shelf life of three years from the date of manufacture when stored in original packaging under dry conditions.
Sterile product lines are tested and confirmed free of detectable DNase, RNase, endotoxin, and pyrogens. Third-party test reports are available upon request for commercial procurement documentation. Non-sterile versions are produced in the same Class 100,000 cleanroom environment but do not receive the final irradiation step.
Pipette tips support routine liquid handling in DNA and RNA extraction, PCR setup, and next-generation sequencing library preparation. Filtered tip models are available for applications requiring aerosol barrier protection against cross-contamination.
In clinical and industrial quality control laboratories, these tips are used for sample dilution, reagent addition, and standard curve preparation. Sterile, nuclease-free versions align with requirements for diagnostic test kit production and in vitro diagnostic (IVD) manufacturing.
